The NX ZEN is so named for a reason; that feeling of being ‘at one’ with the world that diving brings. Advances in materials technology, in diving design, and our ability to apply modern engineering concepts created a dive system that delivered on our priorities.

A stable, comfortable, and ergonomic BCD that is truly ZEN.

Modern BCDs not only need to create a sense of freedom in the water but also provide security and confidence on the surface. Careful attention to the wing design and the balance point of the NX ZEN system means you are held comfortably and confidently whilst waiting for your boat pickup or sharing the excitement of the dive with your buddies.

The tight to the tank streamlining makes buoyancy control more precise. The wing shape adds stability due to reduced air migration and attention to the ideal balance for easy expert trim.

When diving in currents you want to reduce drag for ease of finning. When exploring swim-throughs in a wreck or reef you want to be free of entanglement. This is where you will truly value the NX ZEN’s design.

The ZEN wing is deliberately narrow so that it does not protrude from the side of your tank. This brings advantages in enhancing your buoyancy control, in reducing any entanglement hazards and in significantly reducing drag. As we reduce drag we usually improve our gas consumption, enabling longer and safer dives.

ZEN wing provides 19kg of lift, while its size is comparable to classic wings with 17kg of lift.

The compact engineering of the NX series inflator has allowed a reduction in the required size of the upper part of the wing. This results in a position at the surface that lifts you high out of the water and ensures lift is in the right place when submerged.

Traditional inflation systems are mounted on the side, so that as gas is injected it can disturb trim if you are in a good flat position.

The compact nature of the NX series adapter allows it to be placed dead center, eliminating unwanted gas movement. Air is added and is immediately distributed equally down both sides of the wing, leaving you in perfect trim.

The classic backplates' design history dates back to what could be cut out of an old road sign. For the first time since then, we have looked properly at the ergonomics and anatomy of a diver's back. Our redesign has created a plate that is better in every respect.

Enlarging the upper part of the backplate has achieved better weight distribution during the dive and removes load form the lumbar region. The lower plate design spreads the load comfortably, safely allowing for the optimal attachment of weight pockets and accessories.

The new NX Series back plate is comfortable, stable, and protective of your back.

YELLOW FOR NX SERIES PLATE; PURPLE FOR CLASSIC BACKPLATE

ZEN, as with any other set from the NX Series is equipped with XDEEP’s perfect 3D Mesh lining.

This soft but noncompressive pad adds to your comfort, whether in board shorts or drysuit. It helps prevent any small movement of the backplate against your back, adding to stability and security.

The 3D Mesh material does not need any additional lead due to the smart materials technology that allows easy water penetration and drainage.

V-shaped crotch strap

The NX Series harness is equipped with a totally new V-shaped crotch strap. The V shape is more comfortable, eliminating the single strap design running directly between the legs. Whether walking with your gear to jump in or scootering around a reef, you will feel the very direct benefit.

• IMPROVED COMFORT AT THE SURFACE - The V-shaped crotch strap distributes the load over a larger area, allowing you to sit comfortably into the crotch strap whilst at the surface.

                                        

• IMPROVED STABILITY WHILST DIVING - The V is formed by two attachment points at the bottom of the back plate. This ensures there is an even tension preventing sideways slippage of the system and spreading the load for stability.

                                        

• TWO EASY ACCESS CARGO D-RINGS - The NX Series V-strap is equipped with two Cargo D-Rings instead of the usual one. The design results in the D rings being set off to each side as opposed to a traditional centre ring, providing easier access to clipped off gear.

                                        

EASIER TO PUT ON AND TAKE OFF

The backplate design has resulted in major improvements in donning and doffing the system.

When the harness is unfastened, the shoulder straps are 20% longer than in a classic harness. This creates more room even if you have restricted movement in the shoulders. Tightening the buckle of the waist strap pulls the shoulder straps snugly down, perfectly tensioning the harness fit to your body. No need to adjust for changes from wetsuit to drysuit. The whole system is comfortably held closer to your body stabilising the entire scuba unit.

Modular weight system

To truly be at one with your equipment, your weight system must be perfectly balanced, be secure, and easy to configure and use. The modular weight system in the NX series means you can confine your weight belt to history.

Tailor your weight distribution for the diving you are doing. From a couple of kilos needed in the warm sun to the extra lead needed in cold water diving, you can select the pockets that best suit your needs.