Your shopping cart is empty!
SEA AND SEA Strobe YS-01
*When the YS-01 is used with a camera with built-in flash in housing, use the Fiber-Optic Cable.
* When the YS-D1 is used with a non-SEA&SEA housing, a Strobe Mask Set may be required along with the Fiber-Optic Cable.
* Use of genuine SEA&SEA Fiber-Optic Cables is recommended. SEA&SEA strobes may not function properly if a third-party Fiber-Optic Cables are used (functions such as TTL auto exposure in particular).
Do not use non-recommended batteries (such as lithium primary batteries). Use of non-recommended batteries may cause battery leakage and overheating and may cause the strobe to rupture, which could result in personal injury.
Multiple features condensedinto a compact design
Circular beam angle of 100°x100° and guide number of up to 20. The YS-01 is a new compact-type slave strobe that can be used for all applications from wide-angle to macro photography.
You can switch between DS-TTL (Digital Slave TTL) and a ten-level manual control function, to enable fine adjustment of the light level according to the photographer's intentions. You can also set up a lighting system that uses two strobes in DS-TTL mode. Power comes from four AA batteries for a powerful and long-lasting strobe. You can enjoy taking pictures all day long without having to recharge the batteries. The recycle time takes about two seconds with nickel-metal hydride batteries (2700 mAh) for stress-free continuous shooting. The YS-01 is furnished with a high-luminance white LED target light (1W) indicating the optical axis of the strobe attached to its front face that is effective for night diving.
You can fully exercise your creativity with the YS-01, which can be used as a primary strobe or secondary strobe in a wide range of applications, from compact digital cameras to digital SLR cameras.
[ YS-01 ]
[Guide Number (ISO 100/m) (land)] 20
[Beam Angle] 100°x 100° (with diffuser 110°x110°)
[Batteries] 4xAA A: 6V Ni-MH: 4.8V
[Number of Flashes] A: 230 Ni-MH: 330
[Recycle time (full)] A: 2.5 sec. Ni-MH: 1.9 sec.
[Color temperature] 5600K
[Color temperature w/diffuser] 5250K
[Depth rating] 75m / 250ft
[Dimensions (WxHxD)] 68x108x129mm / 2.7x4.3x5.2inch
[Weight] : 450g / 15.8oz (w/o batteries) * Attached a fixing bolt to the Strobe.
[Underwater weight] : Approx.+10g / -0.4oz(w/ batteries)
- Exposure control: DS-TTL, Light level control dial (GN): 1 / 1.4 / 2 / 2.8 / 4 / 5.6 / 8 / 11 / 16 / 20 (10 steps)
- Pre-flash control: Equipped with pre-flash cancel mode
- DS-TTL function
- Slave function
- Auto power OFF function
- Sync cord: Fiber-Optic Cable
- Over-pressure relief valve
- LED target light
0 reviews / Write a review
Easy and Versatile Slave TTL
As the YS-03 has been designe..
Sea and Sea Cable Fiber Optic Cable II M/2 Connectors ..
SEA AND SEA Accessories Silicone GreaseSilicone Grease
SEA&SEA’s own brand ..
A tool to safely remove O-rings for cleaning and greasing withou..
SEA & SEA Strobe O-Ring Set ( FOR YS-90DX / YS-110S / YS-01 / YS-02 / YS-03/ YS-D1 / YS-D2) Product ..
Tags: SEA AND SEA - YS-01,
Photography and Filming,
Sea and Sea Underwater Strobes,